Elcon 215DSXE Advance Automatic Panel Saw
High speed saw to avoid chipping and breakout on the panel face, repeat stop for the horizontal cutting of strips of the same width, programming rail to set fixed dimensions for serial work, fast change-over from vertical to horizontal sawing, travelling saw beam for the horizontal sawing of stationary panels, adjustable sawing depth to facilitate the cutting of grooves or plunging into a panel, dual sawing height with pull-out fence for easier cutting of smaller panels.
 |  |  |
Click on images for enlarged view
 |
Totally enclosed sawblade |
|
Extra support for small pieces |
|
Automatic moveable frame incorporating moisture filter |
|
Accuracy of cut to DIN 875/1 |
|
3kW (4 HP) - automatic brake motor (3 phase) |
|
4200 rpm speed of sawblade |
|
300mm diameter of sawblade x 30mm bore |
|
80mm maximum depth of cut in standard operation |
|
Maximum cutting depth with advance clamping 60mm |
|
Advance clamping system |
|
Automatic bottom edge trimming |
|
Automatic rotation to saw head |
|
Fully automatic operation to horizontal and vertical cycle |
|
Stepless variable traverse speed |
|
Programmable strip cutting |
|
Fixed aluminium transport rollers with pneumatic clamp |
|
Pneumatic plunging to saw cut |
|
Extension to measuring stop |
|
Electronic digital readout to both vertical and horizontal axis |
|
Maximum cutting length 4300mm |
|
Maximum cutting height 2150mm |
£23,950.00
The company has a policy of continuous product development
and improvement, specifications are therefore subject to change without
notice. The company accepts no liability for discrepancies in specifications
or illustrations contained in its publications.