ST80 Radial Arm Resaw
The ST80 is the latest addition to Stenner’s famous range of radial arm resaws, designed to produce a machine of classical strength and durability which would be equally at home in a small joinery shop or a busy service mill.
 |  |  |
 |  |  |
Click on images for enlarged view
This all new resaw continues the Stenner tradition of constructing
a compact, well engineered machine and combining it with the latest in technology
in a package that has both reliability and a very high performance capability.
The ST80 is a true resaw but requires no special installation.
The machine needs only to be bolted to the factory floor and connected to
mains electricity, compressed air and dust extraction.
Capable of handling sections of over 500mm width and a maximum depth of cut of 310mm, the ST80 has pneumatic saw straining which, coupled with factory set replaceable pressure saw guides, ensure accuracy of cut and minimise blade deviation. These features are combined with a 11kw (15hp) main motor and a feed system controlled by electronic variable speed device offering an operating range from 5 to 60 metres/min. The multi-roller fence tilts to 35 degrees for angle cutting and offers 305mm (12 in ) saw to fence capacity at 90 degrees.
The ST80 is operated by means of an HMI controller
which governs the feed speed, set up and diagnostics, thereby increasing
reliability of electrical controls and simplifying
machine operation.
| STENNER ST80 SPECIFICATIONS | |
| Pulley diameter | 850mm (33.5 in) |
| Bandsaw thickness | Max 1.0mm (19g) Min 0.8mm (21g) |
| Bandsaw blade width | 80mm (3.25in) |
| Bandsaw blade length | Max 5080mm Min 5010mm |
| Depth of cut | 310mm (12.25in) |
| Max opening saw to fence | 305mm (12in) |
| Max opening saw to feed rollers | 230mm (9in) |
| Feeds speeds (infinitely variable) | 5 - 60 metres/min |
| Main motor | 11kw (15hp) |
| Height of table from floor | 900mm |
| Cleaner fluid capacity | 3 litres (0.66 gallon) |
| Pneumatic requirements | 0.2 litres/sec (0.42cfm) @ 6bar |
| Dust extraction outlet | 150mm |
| Machine length | 1725mm |
| Machine width | 840mm |
| Machine height | 2115mm |
| Machine weight | 1500kgs |
Options:
1. Rubber covered feed roller
2. Arris rail feed roller
The company has a policy of continuous product development
and improvement, specifications are therefore subject to change without
notice. The company accepts no liability for discrepancies in specifications
or illustrations contained in its publications.