Band Resaws
Please click on images for further information
WADKIN PBR/HD 700 mm (27.5”)
Variable feed speeds 10-80 fpm (4-25 mpm), takes sawblades 76 mm (3”)
wide, tilt table. Two motors (11.2 kW (15 HP) to saw). Max depth under sawguide
325 mm (13”).
More about the Wadkin PBR/HD Band Resaw>>
STENNER ST80 850 mm (33.5”)
Infinitely variable feed speeds 5 - 60 m/min (16 - 200 fpm). Takes sawblades
80 mm (3.25”) wide. 11 kW (15 HP) main motor drive (3 phase). Max
depth under sawguide 315 mm (12.5”). INCLUDED - one sawblade. NOTE
- An air supply is required to operate this machine ... we shall be pleased
to quote for suitable compressor if required.
More about the Stenner ST80 Band Resaw>>
| CLICK
TO VIEW VIDEOS |
Stenner
ST80 1 min, 42 secs (11Mb) |
Stenner
ST100R 1 min, 17 secs (11Mb) |
Stenner
ST130 1 min, 17 secs (11Mb) |
STENNER
ST100R 915 mm (36")
Infinitely variable feed speeds 5 - 60 m/min (16 - 200 fpm), takes sawblades
100 mm (4") wide. 15 kW (20 HP) main motor drive (3 phase). Max depth
under sawguide 400 mm (15.75"). INCLUDED:- Infeed and outfeed table
rollers, One sawblade, Pneumatically operated radial arm feed activated
by photocell along with hand wheel for fine adjustment, Digital readout
to fence adjustment through HMI control unit, Foot pedal override of pneumatic
movement of radial arm. NOTE - An air supply is required to operate this
machine ... we shall be pleased to quote for suitable compressor if required.
More about the Stenner ST100R Band Resaw>>
| CLICK
TO VIEW VIDEOS |
Stenner
ST80 1 min, 42 secs (11Mb) |
Stenner
ST100R 1 min, 17 secs (11Mb) |
Stenner
ST130 1 min, 17 secs (11Mb) |
STENNER
ST100E 915 mm (36")
Specification generally similar to ST100R (above) but incorporating three
cutting modes, ie centre cutting, off-centre cutting and dimension cutting,
all controlled and programmed by remote HMI pedestal. Feed system incorporates
electrically driven multi roller fence and feed rollers adjusted and controlled
by electric motors and inverter. NOTE - An air supply is required to operate
this machine ... we shall be pleased to quote for suitable compressor if
required.
More about the Stenner ST100E Band Resaw>>
| CLICK
TO VIEW VIDEOS |
Stenner
ST80 1 min, 42 secs (11Mb) |
Stenner
ST100R 1 min, 17 secs (11Mb) |
Stenner
ST130 1 min, 17 secs (11Mb) |
STENNER ST130 950 mm (37.5”)
Infinitely variable feed speeds 15 - 60 m/min (50 - 200 fpm), takes sawblades
130 mm (5") wide. 30 kW (40 HP) main motor drive (3 phase). Max depth
under sawguide 400 mm (16"). NOTE - An air supply is required to operate
this machine ... we shall be pleased to quote for suitable compressor if
required.
EXTRAS:-
Powered horizontal table rollers £1159.00
Programmable fence setting system £1732.00
More about the Stenner ST130 Band Resaw>>
| CLICK
TO VIEW VIDEOS |
Stenner
ST80 1 min, 42 secs (11Mb) |
Stenner
ST100R 1 min, 17 secs (11Mb) |
Stenner
ST130 1 min, 17 secs (11Mb) |