Grinders
Here are the previously owned machines in the Grinders section:
WADKIN BZG
Incorparating two spindles with five grinding/ stropping wheels/ etc/ general purpose and screw adjusted tool rests. Spindle speeds 300 and 2000 rpm. 0.75 kW (1HP) (3 phase). Capacity: Admits oil stone and emery wheel 200 mm (8") dia x 19 (2") mm wide; Stropping wheel and 76 x 127 mm (3" x 5") long grinding cone for gouges.
Condition B - Serviced
Stock number: 3843
Price: £575.00
WADKIN NH UNIVERSAL CUTTER GRINDER
The motorised head carries a grinding wheel at each end. It will swivel 240 degrees and has rise and fall adjustment. Compound sliding table for grinding knives up to 315 mm (12.5") long using dividing head arbor or up to 610 mm (24") long using vee blocks. Will admit attachments for the regrinding and maintaining of all cutter equipment used on modern high speed woodworking machines. 1.5 kW (2 HP) (3 phase) .INCLUDED - Dividing head and tailstock.
Special offer
Stock number: 2728
Price: £1500.00
WEINIG RONDAMAT 929 PROFILE
Pivot action machine for the original shaping and regrinding of moulder knives in the block and profile grinding solid tipped heads etc. Max length of cutter profile 230 mm. Max dia of cutting circle 300 mm. Min dia of cutting circle 100 mm. 1.1 kW (1.5 HP) (3 phase).
Condition B - Serviced
Stock number: 3550
Price: £2250.00
WADKIN NV300 PROFILE GRINDER
With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS/ Stellite/ TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. ( 3 phase). INCLUDED - Arbor/grinding wheel/ stylus etc
Condition B - Serviced
Stock number: 3862
Price: £3950.00
WADKIN NQ AUTO STRAIGHT WET GRINDER
For both flat and hollow grinding of planing knives/veneer knives/guillotine knives etc up to 915 mm (36") long and between 19 mm (0.75") and 105 mm (4.125") wide. Automatic traverse to the grinding head which has automatic downfeed to the items being ground. The machine is designed so that the grinding wheel is constantly flooded with a grinding solution when in use. Canting adjustment to grinding head and knife holder. Two motors 1.5 kW (2 HP to the grinding head). (3 phase).
Condition A - Rebuilt
Stock number: 2954
Price: £5750.00
Please contact us should more information be required relative to any machine.