Panel Dimension Saws
Here are the previously owned machines in the Panel Dimension Saws section:
WADKIN BGP1200S 300 mm (12")
SLIDING TABLE PANEL SAW (WITH SCORING) Rise/fall/tilt saw. Table 860 x 1500 mm (34" x 60") overall the left hand portion of which slides past the saw. Rip fence. Cross cut fence with stop bar and two stops. 2.2 kW (3 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep; Saw to rip fence (max) 660 mm (26"); Max distance in front of saw when cutting 25 mm (1") deep is 1270 mm (50") and distance from saw to stops on sliding table is 2440 mm (96"). Note - Mitre fence not included ... price on application (if required) INCLUDED - DC injection brake (UK market only)
Condition B - Serviced
Stock number: 3319
Price: £2950.00
ROBINSON ET/T 455 mm (18")
Rise/ fall/ tilt saw. Hand operated brake. Double mitre crosscut fence. Extension rolling table. INCLUDED:-Hand operated brake Equipped with power tilting movement to the saw
Condition B - Serviced
Stock number: 3395
Price: £2950.00
WADKIN BGP1200S 300 mm (12") SLIDING TABLE PANEL SAW
(WITH SCORING) - Rise/ fall/ tilt saw. Table 860 x 1500 mm (34" x 60") overall the left hand portion of which slides past the saw. Rip fence/ cross cut fence with stop bar and two stops. 2.2 kW (3 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep; Saw to rip fence (max) 660 mm (26"); Max distance in front of saw when cutting 25 mm (1") deep is 1270 mm (50") and distance from saw to stops on sliding table is 2440 mm (96") .Note - Mitre fence not included ... price on application (if required) INCLUDED - DC injection brake (UK market only)
Condition B - Serviced
Stock number: 3542
Price: £2950.00
SCM SI 16W 3200 mm SLIDING TABLE PANEL SAW
Rise/ fall/ tilt sawblade with scoring unit. 3200 x 360 mm sliding table. 1160 x 630 mm cast table with 980 x 510 mm right hand extension table. Overhead crown guard (3 phase).
Condition B - Serviced
Stock number: 4018
Price: £3500.00
GMC KGS300E VERTICAL PANEL SAW
For board sizes up to 3200 x 1900 mm. Max depth of cut 50 mm. 4800 rpm. 250 mm dia sawblade. Moving frame. Mid rail for small work pieces. 2.2 kW (3 HP) (3 phase). NOTE - Stopping time will be tested to ensure compliance with PUWER.
Condition B - Serviced
Stock number: 4021
Price: £3500.00
GMC KGS 515s VERTICAL PANEL SAW
For board sizes up to 4600 x 2200 mm. Mid-rail support for small work pieces and board rollers. (3 phase).
Condition B - Serviced
Stock number: 4029
Price: £4950.00
ELCON 155RSX VERTICAL PANEL SAW
Equipped with high speed saw/ repeat stop/ programming rail/ deeping facility/ pneumatic plunging. 3 kW (4 HP) (3 phase). Sawing capacity: 3100 x 1550 mm. CE SPECIFICATION. NOTE - An air supply is necessary for the operation of this machine ... we shall be pleased to quote for a suitable compressor if required.
Condition B - Serviced
Stock number: 3871
Price: £5750.00
WADKIN PP 450 mm (18") DIMENSION SAW
Table 1120 x 1300 mm (44" x 51.25") overall the left hand portion of which slides past the saw. Rise/ fall/ tilt saw. Adjustable angle fence with stop bar and stop. 3.7 kW (5 HP) (3 phase). Capacity: Cuts 140 mm (5.5") deep; saw to fence (max) 760 mm (30"). NOTE - Mitre fence not included ... price on application (if required). INCLUDED:- Longer sliding table to give 1220 x 25 mm (48" x 1") capacity in front of saw; Extended crosscutting table with outer floor support; DC injection brake (UK market only)
Condition A - Rebuilt
Stock number: 3864
Price: £6500.00
ELCON 155DSXE VERTICAL PANEL SAW
Equipped with high speed saw/ repeat stop/ programming rail/ deeping facility/ pneumatic plunging/ extension to measuring stop. 3 kW (4 HP) (3 phase). Sawing capacity 3300 x 1550 mm. Fully automatic operation to vertical and horizontal saw cycle. Digital readout to both vertical and horizontal axis. CE SPECIFICATION. NOTE - An air supply is required to operate this machine. We shall be pleassed to quote for suitable compressor if required.
Condition B - Serviced
Stock number: 3943
Price: £9750.00
Please contact us should more information be required relative to any machine.